Different types of brush rollers have different production processes
Release time:
2024-03-08
First cut the steel shaft into a suitable size, rotate the blank on the machine tool, weld, reinforce, and straighten, and then make the roller core prototype through the lathe; then according to different requirements, the core tube may be placed outside the prototype. Direct injection into the mold, so that the brush roll body is basically shaped. The injection-molded roller body or sleeve is completed on the machine tool according to the size required by the drawing, and subsequent processing is carried out according to different process requirements, such as fine grinding of the rubber roller core, different keyway heads or interfaces on the shaft.
First cut the steel shaft into a suitable size, rotate the blank on the machine tool, weld, reinforce, and straighten, and then make the roller core prototype through the lathe; then according to different requirements, the core tube may be placed outside the prototype. Direct injection into the mold, so that the brush roll body is basically shaped. The injection-molded roller body or sleeve is completed on the machine tool according to the size required by the drawing, and subsequent processing is carried out according to different process requirements, such as fine grinding of the rubber roller core, different keyway heads or interfaces on the shaft.
Drilling flocking brush roller-use CNC punching equipment to punch the finished brush roller. The depth and density of the holes are set according to different requirements. The punching brush roller is placed on a fully automatic CNC tufting machine or a semi-automatic horseshoe tufting machine for tufting; after the tufting is completed, the roller shearing machine cuts off the bristles on the surface of the brush roller. Upgrade.
Related News
Share
Copyright©2023 Taizhou Hongshuo Intelligent Machinery Co., Ltd. Website Powered by www.300.cn seo